UV LAMPS

12.120 Shuttle LED UV Lamp

High intensity UV LED lamp (up to 10.000 µW/cm² at 38 cm/15 inches), with a very broad inspection area of over 35 cm (13,8 inches) diameter for a higher inspection productivity.

Features:

• 4 high efficiency UV LEDs, Certified for wavelength of 365 nm
• Up to 30,000 hours LED bulb life: never change a UV lamp again!
• UV LEDs produce a very low visible light emission of less than 2 footcandles / 20 lux
  (special version less than 5 lx)
• Instant-on operation, lamp reaches full intensity immediately
• Very light: 790g (1,74 pounds)
• 1 white light LED to allow also for visible light inspection
• Very low power consumption ( < 15W )
• 3-way switch: UV ON - OFF - white light ON
• Mercury and lead free
• Rubber protected glass lens to protect LEDs from damage
• Built-in fan keeps LEDs cool to maintain optimum light output during extended use
• According to: ASTM, ASME, AMS, ISO intensity specifications for fluorescent liquid penetrants and magnetic particles inspection
• Safe Power Supply: 12V through mains adapter (included). The lamp is also available
  (code 12.121) with integrated lithium battery.

Note: Also available in special version with adjustable white light dimmer to be used with dual-colored magnetic particles Elite FW1

UV Intensity Profile (μW/cm2) at 15 in (38 cm)

---

12.141 B.B.T. Blacklight Battery Torch KIT

LED UV Lamp with spraying kit
High intensity UV LED lamp (up to 9,000 μW/cm² at 38 cm/15 inches), with a very broad inspection area of over 15 cm (6 inches) diameter. Includes the one-operator spraying kit: one hand on the yoke and one hand to hold fluorescent spray can with integrated UV light.

Features:

• 1 high efficiency UV LED, Certified for wavelength of 365 nm
• Up to 30,000 hours LED bulb life: never change a UV lamp again!
• UV LED produce a very low visible light emission (< 1 foot candles / < 10 lx)
• Instant-on operation, led reaches full intensity immediately
• Very light: 160 g; Dimensions: length 14 cm – diameter 3 cm
• Very low power consumption ( < 2W )
• Mercury and lead free
• IP67 protection from dust and splashing water
• According to: ASTM, ASME, AMS, ISO intensity specifications for fluorescent liquid penetrants and magnetic particles inspection
• Safe Power Supply: Powered by a rechargeable long-lasting battery (included)

---

12.125 Shuttle LED UV Lamp ECO

High intensity UV LED lamp (up to 5.000 mW/cm² at 38 cm/15 inches), with a very broad inspection area of over 25 cm (10 inches) diameter for a higher inspection productivity.

Features:

• 3 high efficiency UV LEDs, Certified for wavelength of 365 nm
• Up to 30,000 hours LED bulb life: never change a UV lamp again!
• UV LEDs produce a very low visible light emission of less than 1 footcandles / 10 lux
• Instant-on operation, lamp reaches full intensity immediately
• Very light: 690g (1,5 pounds)
• 1 white light LED to allow also for visible light inspection (over 2000 lux at 38 cm/15 inches)
• Very low power consumption ( < 12W )
• 3-way switch: UV ON - OFF - white light ON
• Mercury and lead free
• Rubber protected glass lens to protect LEDs from damage
• Passive cooling for constant UV light output during extended use
• According to: ASTM, ASME, AMS, ISO intensity specifications for fluorescent liquid penetrants and magnetic particles inspection
• Safe Power Supply: 12V through mains adapter (included).

Note: The lamp is also available with integrated lithium battery (code 12.126)

---

12.122 Shuttle 5 LED UV Lamp

Very high intensity UV LED lamp (over 10.000 μW/cm² at 38 cm/15 inches), with a very broad inspection area of over 40 cm (16 inches about - minimum 1.000 μW/cm2) diameter for a higher inspection productivity. Same characteristics of 12.120 Shuttle LED UV Lamp but featuring 5 high efficiency last generation UV LEDs, Certified for wavelength of 365 nm, to provide the broadest inspection area for a portable UV lamp in the NDT industry.

12.128 SHUTTLE LED UV LAMP “COMPACT” WITH INTEGRATED LITHIUM BATTERY

Compact size high intensity LED UV lamp (up to 6,500 μW/cm² at 38cm distance), covers an area of approximately 25cm in diameter for increased inspection productivity.
Features:

• Up to 30,000 hours of LED life: save on bulb changes!
• UV LEDs produce very low visible light of less than 1 footcandles / 10 lux
• Immediately on, the LEDs immediately reach maximum power
• Very light: 0,6 Kg
• 1 white light LED to allow inspection even in visible light (over 200 lux at 38 cm)
• Very low energy consumption ( < 12W )
• 3-way power switch: UV ON – OFF – White Light ON
• Mercury and lead free
• Glass and rubber to protect the LEDs
• Passive cooling for constant UV output even in case of prolonged use
• Complies with Standards: ISO, ASTM, ASME, AMS for testing with liquid penetrants and fluorescent magnetic powders

---

12.123 Shuttle AERO LED UV Lamp

UV LED lamp conforms to ASTM E3022 and ROLLS-ROYCE RRES 90061, with an inspection area of over 20cm diameter (8 inches), minimum 1.000 mW/cm², for a higher inspection productivity.

Features:

• 4 high efficiency UV LEDs (last generation), Certified for wavelength of 365 nm
• Up to 30,000 hours LED bulb life: never change a UV lamp again!
• UV LEDs produce a very low visible light emission of less than 1 footcandles / 10 lux
• Instant-on operation, lamp reaches full intensity immediately
• Very light: 790g (1,7 pounds)
• 1 white light LED to allow also for visible light inspection (over 2000 lux at 38 cm/15 inches)
• Very low power consumption ( < 15W )
• 3-way switch: UV ON - OFF - white light ON
• Mercury and lead free
• Rubber protected glass lens to protect LEDs from damage
• Built-in fan keeps LEDs cool to maintain optimum light output during extended use
• According to: ASTM, ASME, AMS, ISO intensity specifications for fluorescent liquid penetrants and magnetic particles inspection
• Safe Power Supply: 12V through mains adapter (included). The lamp is also available (code 12.124) with integrated lithium battery .

---

 

12.610 Stationary UV Lamp

High intensity UV LED lamp (up to 7,000 μW/cm² at 38 cm/15 inches), with a very broad inspection area for a higher inspection productivity.
Features:

• High efficiency long-lasting UV LEDs, Certified for wavelength of 365 nm
• Indicators of burnt-out LED
• UV LEDs produce a very low visible light emission of less than 1 footcandle / 10 lux
• Instant-on operation, lamp reaches full intensity immediately
• Very low power consumption (up to -90% energy savings compared to 400W UV lamps)
• Safety: Safe Power Supply (24V DC), mercury and lead free
• According to: ASTM, ASME, AMS, ISO, ... standards for fluorescent magnetic particles and liquid penetrants inspection
• Available in different sizes and models according to the Customer’s needs
• Special version with adjustable white light dimmer to be used with dual-colored magnetic particles Elite FW1

Model 16-7 (16 UV LEDs and 7 white LEDs) Lamp size: 560 x 170 x 105 mm

 

More information