15.100 COUPLANT 333 
The product is a powder dose, which mixed with 5 to 8 liters of water, makes a dense, thixotropic gelatine, special for corroded surfaces, welding, fused and forged.

15.118  COUPLANT FYp
A dose of powder, in plastic envelopes to be mixed with 2 to 3 liters of water to obtain a fluid gel for all surfaces. Rust proof.

GEL COUPLANTS

15.140 M.C. ,MATRIX COUPLANT

Blue fluid coupling gel for all surfaces, also vertical. It doesn't dry, also at medium temperatures, it can be used from -10° C to +120° C. It can be diluted with water till 1:1. Probe runs smoothly. It rapidly gives the maximum peak of the signal. Easy to be removed from the surfaces with water or solvents. Do not feel oily and does not corrode.Available in 500 ml bottles with dispenser (code 15.140) and 5 Kg. can (code 15.141).

15.110 C 333 5 Kg
Dense blue gel, packaged in 5 Kg cans (11 lb), it contains a corrosion inhibitor which allows the use also on cast iron.

It dries on the surface leaving a white-blue powder, not slippery. It can be diluted with water till 1:1.

15.117  COUPLANT FYr
Fluid couplant gel yellow fluorescent for all surfaces. It gains a lot of dB, high acoustical impedance. It contains a strong rust inhibitor, active also on cast iron.  Packaged in bottle of 500 ml with a dispenser plug (p/n 15.116) and in cans of 5 Kg (11 lb - p/n 15.117). It can be diluted with water till 1:1.

HIGH TEMPERATURE AND SPECIAL COUPLANTS

15.119 COUPLANT MHT 
Special paste for surfaces from room temperature to medium – high temperature (max 300° C).
It doesn't dry on the transducer, increasing its life and eliminating the cleaning time. Not flammable. It doesn't produce smokes irritant or harmful for operator's health.

15.113  COUPLANT C200
Special coupling oil for surfaces with temperature between – 30° and + 200° C.
Its viscosity and features on transmission of ultrasonic waves remain constant inside this range.
Available in one liter bottle (0,264 gal - p/n 15.112). 

15.120 UHT 
Special paste for very high temperature surfaces: from 200° top 550° C. It doesn’t dry on the transducer, increasing its life and eliminating the cleaning time. Not flammable. It doesn’t produce smokes irritant or harmful for operator’s health.

15.115 W4US .
Additive for water used in ultrasonic equipments, immersion tanks or squirters. It’s a mixture of surfactants, corrosion inhibitors and additives (fungicide, antibacterial). It doesn’t produce foam, ideal for squirter applications. It doesn’t affect composites. Dilute the product from 0.5 to 5% in water.